4/19    After installing Logitech wireless mouse, my friend cannot connect from
        his PC to his wireless broadband router via a USB wireless network
        device.  It said that it cannot obtain IP address from the router.  Even
        uninstalling the Logitech wireless mouse doesn't help.  Do you know how
        to fix the wireless LAN problem, so that his PC can obtain IP address
        again?
	...

8/29    What SMTP settings should I be enabling/disabling for soda?  I can
        receive csua mails over IMAP on my treo just fine, but I always
        get relay denied errors when sending outside http://csua.berkeley.edu.
        \_ Dunno the answer, but I have the same problem.  I ended up
           using Gmail's SMTP server.  The only thing is that you'll have
           register your CSUA email account with Gmail so that it'll let
	...

5/23    I have DSL through AT&T. The service was originally established
        through PacBell, transitioned to SBC, and now AT&T. I still have
        my original plan and never converted to a SBC Yahoo! (now AT&T
        Yahoo!) account. I noticed the price will be a lot cheaper if I
        do. Are there any drawbacks? I thought someone mentioned some
        negatives about the Yahoo! tie-in once upon a time.
	...

3/24    I want to write in my DSL router to allow incoming connection
        from certain IP range. How do I find out the IP range for SBC
        DSL say in Bay Area/SF?
	...

2/18    My DSL modem's ip address is 192.168.0.1, my internal network
        behind my router is 10.0.0.x. Is there a way I can configure
        the router so I can access the DSL modem from my 10.0.0.x
        network directly without re-wiring? Static routes? I tried it
        but no much luck. I also tried changing my internal network to
        192.168.0.x, but still does not work. Thanks.
	...

1/28    Just switched to Comcast from SBC and generally happy with it.  But
        can someone please explain to me why they are constantly pumping
        ARP traffic through the network?  It seems harmless, but I'm curious
        as I didn't see it with DSL.  It's a little disconcerting to see
        constant traffic on your router, even if ARPs are harmless from
        a bandwidth perspective, and it makes the WAN send/receive light
	...

1/21    I am trying to setup a small network for my girlfriend's
        mom's company.  They just bought an accounting package
        which requires windows 2003 server.  And they want internet
        access from each computer.  How should the network be setuped?
        Would it be dumb to use static IP for each computer and a
        computer as internet gateway?
	...

8/29    What's the difference between a hub, a switch and a router?  Thx.
        \_ AFAIK, probably be corrected by someone:
           hub: Allows communication on a LAN with bandwith shared amongs all
                the nodes on the hub and maxing out at the max line speed.
           switch: Allows communication on a LAN with bandwith greater than
                the max line speed (point to point)
	...

6/2     I've been to many places and almost every place I go to have
        802.11b/g. However, almost all of them have protected access,
        which I presume they use because they don't want people stealing
        their bandwidth. So here is one idea I think will really
        revolutionize 802.11X... an option in the router that allows you to
        specify the percentage of unprotected bandwidth you are willing to
	...

2/25    What is the smallest (physical and price) cisco router that can
        handle BGP?  It should be able to have more than 256 ram.
        \_ When you say ``handle BGP'', do you mean supports the bgp
           protocol or supports enough ram to keep a reasonable (what do you
           consider to be reasonable) number of routes in memory?  Do you want
           to be peering at PAIX, or do you just need a router to run the T1
	...